Tumaker Pro Dual Direct Drive HR – Direct Drive HR

We present the Tumaker Pro Dual 3D Printer with two independent Direct Drive HR – Direct Drive HR heads. Under the seal of quality that supports TUMAKER in all its products, this 3D printer takes reliability and efficiency to the next level. An innovation never seen before in 3D printing. With two Direct Drive HR heads, experience the best possible performance when it comes to filament 3D printing. Enabling efficient printing of flexible materials.

Versatility and efficiency

The Tumaker Pro Dual Direct Drive HR – Direct Drive HR 3D Printer offers different printing possibilities:

  • Single head production: Prints with only one head, like a single extruder 3D printer.
  • Double head production: Produces a single piece using both heads. Alternating colors or materials for the manufacture of it. Being able to use soluble materials for the support.
  • Simultaneous production: Mirror printing, creates two pieces at the same time, one with each head of the Tumaker Pro Dual Direct Drive HR – Direct Drive HR.

Why choose Tumaker Pro Dual Direct Drive HR – Direct Drive HR 3D printer?

This 3D Printer has developments specially thought out and designed to facilitate its professional and industrial use.

  • Increase your productivity: Print two pieces simultaneously.
  • Eliminates risks: filament end sensor that pauses printing if it runs out of material and restarts the job where it left off.
  • Maximize your possibilities with flexible materials: HR head. Direct extrusion that ensures the best behavior with flexible filaments.
  • Work smoothly: 32-bit processor ensures stability and increases speed.
  • Take care of the work environment: movements controlled by that facilitate silent work, without the usual noise of 3D printing.
  • Optimize control: WIFI connectivity, and 5” full color touch screen. Possibility of Ethernet connectivity.
  • Continuous and stable printing: calibration system that allows the printer to map the base once calibrated, so that it is automatically corrected during printing, without the need for manual adjustments.< /li>
  • Avoid incidents: by having an independent double head system, we avoid the incidents typical of the use of two materials in printers with in-line heads.
  • Improve your impressions: thanks to the use of professional SIMPLIFY 3D software. The Tumaker Pro Dual Direct Drive HR – Direct Drive HR is supplied with a perpetual license of the best professional software on the market.
  • Speed ​​up your work: printer base with extremely fast heating system.
  • Protection at work: security closure.
  • Wide variety of materials: (TPU HARDNESS +) – (PETG FP) .- (PVA ULTRA) – (PLA Recycled) – (PLA Crystal) – (TPU CF) – (HIPS) – (PVA)- (PC) – (R-PET) – (PLA Silk) – (PET CF) – (PP) – (PP SUPPORT) – (PA CF) – (ASA) – (PETG) – (PLA 3D850 – (PA HT) – (PETG MDT) – (PLA 3D870) – (FLEX 93A) – (ABS) – (FLEX 98A) – (Glace) – (Medical) – (ABS FP) – (PP GF) – (Nylstrong)
  • Large print volume: up to 495 x 470 x 500 mm

PRINTER
SPECIFICATIONS

Build Volume

DUAL Printing

Mirror Printing

Independent Extruders

Packing Size

Gross Weight

Printer Size

Printer Weight

NX Pro Dual
2 x Direct Drive HR

270x185x200mm

235x185x200mm

145x185x200mm

Yes

605x501x500 mm

32 kg

550x440x410 mm

30 kg

BIGFOOT 200 Pro Dual
2 x Direct Drive HR

495x470x200mm

475x470x200mm

250x470x200mm

Yes

1006x940x735 mm

100 kg

860x720x510 mm

68 kg

BIGFOOT 350 Pro Dual

2 x Direct Drive HR

495x470x350 mm

475x450x350 mm

250x470x350mm

Yes

1006x940x885 mm

120 kg

860x720x660 mm

75 kg

BIGFOOT 500 Pro Dual

2 x Direct Drive HR

495x470x500mm

475x470x500mm

250x470x500mm

Yes

1006x940x1035 mm

140 kg

860x720x810 mm

82 kg

Optimized Materials

(TPU HARDNESS +) – (PETG FP) .- (PVA ULTRA) – (PLA Recycled) – (PLA Crystal) – (TPU CF) – (HIPS) – (PVA)- (PC) – (R-PET) – (PLA Silk) – (PET CF) – (PP) – (PP SUPPORT) – (PA CF) – (ASA) – (PETG) – (PLA 3D850 – (PA HT) – (PETG MDT) – (PLA 3D870) – (FLEX 93A) – (ABS) – (FLEX 98A) – (Glace) – (Medical) – (ABS FP) – (PP GF) – (Nylstrong)

Nozzle Diameter (mm)

(0,15 nozzle: 0.05 mm) – (0,25 nozzle: 0.16 mm) – (0,4 nozzle: 0,3 mm) – (0,6 nozzle: 0,48 mm) – (0,8 nozzle: 0.6 mm)

Layer Resolution

10μm

Maximum Layer Size

(0,25 nozzle: 0.16 mm) – (0,4 nozzle: 0,3 mm) – (0,6 nozzle: 0,48 mm) – (0,8 nozzle: 0.6 mm)

Extruder maximum temperature

300ºC

Nozzle Heating Time

20ºC: 200ºC – 1’15” / 250ºC -1’50” / 300ºC -2’35”

Heated bed maximum temperature

100°C

Power

Energy Smart Management. Power Rating: 500W. Noise Level: 44 dB (closed door, 40dB)

Display

5″color touch screen. Control devices: PC, tablet, Smartphone. Control mode: Web

Software

Simplify3D Professional Software

Connectivity

Connected to network: Wifi, Ethernet (optional)

Warranty Period

1-Year Limited Warranty

One more thing!

Since TUMAKER printers are tailored for customers there are additional options:

Specialized Heaters:

  • Heater Core (300°C): Standard heater for the most common typical use materials. This heater is included by default with the hot-end.
  • Heater Core High Flow (300°C): Specifically designed for high-flow nozzles. Ideal for common typical use materials that require a higher extrusion rate. Special for high-flow nozzles.
  • Heater Core High-Precision (400°C): Optimized heater for advanced materials requiring temperatures up to 400°C. Ideal for applications demanding high precision in temperature control.
  • Heater Core High-Temperature (500°C): Advanced heater for materials needing temperatures up to 500°C. Suitable for high-temperature applications and specialized materials.

For additional information contact us on 3d@kopt.si

 

This post is also available in: Slovenian