For robotic welding of series of work pieces we use ABB robot FlexArc 1600th.
CNC Welding Cell
3D Measuring Device
For 3d measurements we use 3D measuring device Global Performance by DEA Hexagon.
In the table below you can see the perimeters of device measurement.
| X | Y | Z |
| 700 | 700 | 500 |
Measurement accuracy: MPE=from 1.5 + L/333 µm
3-axis and 5-axis Milling Machines
5-axis milling machine CNC, HERMLE C400 U
Specifications:
Traverse X Axis: 850 mm
Traverse Y Axis : 700 mm
Traverse Z Axis: 500 mm
Rapid linear traverses: 35-35-35 m/min
Linear acceleration: 6 m/s
Linear feed force: 7000 n
Max. vertical table clearence: Ø 625 mm
Max. workpiece diameter: 650 mm
Max. workpiece height: 500 mm
Collision circle (A axis) in 0° position: Ø 885 mm
5-axis DIGIT 318 company FIDIA.
Specifications:
Machine Type : VERTICAL
Number of Axes : 5
X Axis Travel : 3000 mm
Y Axis Travel : 1000 mm
Z Axis Travel : 600 mm
Spindles : 1
Feed rate : 20.000 mm/min
Spindle Speed : 20000 rpm
5-axis milling machine CNC, MASTER-P company FAMU.
Specifications:
Machine Type : VERTICAL
Control : Heidenhain
Number of Axes : 5
X Axis Travel : 2000 mm
Y Axis Travel : 800 mm
Z Axis Travel : 800 mm
Tool Stations : 20
Spindles : 1
Motor Power : 30 kw
Spindle Speed : 22000 rpm
Extra Functions : Articulated
3-axis LAGUN 2600.
Specifications:
Machine Type: VERTICAL
Number of Axes: 3
X Axis Travel: 2500 mm
Y Axis Travel: 900 mm
Z Axis Travel: 800 mm
Spindles : 1
Motor Power : 22 kw
Cnc Rolling Machine
HBR 126 P, CNC rolling machine form company HACO.
Specifications:
Working length : 1250 Mm
Bending capacity: 6 mm
Pre-bend capacity : 10GA
Top roll diameter : 125 mm
Lower roll diameter : 120 mm
Side roll diameter : 110 mm
Power (HP) : 3
Weight : 1500 kg
Total length : 2500 mm
Width : 850 mm
Height : 1030 mm
CNC Turning Machine
Many turning machines enrich our production and allow us to do individual and series processing of work pieces.
TURNING MACHINE ELAN – POTISJE PA-C25 type PA-C 25, serial nr. 6333, POTISJE
TURNING MACHINE UNIVERSAL type S 90/310, serial nr. 20544, PINACHO
TURNING MACHINE UNIVERSAL D480/100 type D-480, serial nr. 1925.2250-06
TURNING MACHINE UNIVERSAL D-480/1000 type D-480, serial nr.1925.1715-06,
Sinking and Wirecut Erosion
For individual production we use two machines:
ELECTROEROSION MACHINE JAPAX type LX 35, JAPAX
ELECTROEROSION CM 4360 CNC type CM 43 – CNCT EDM, OMEGA
WIRE-CUTTING EDM EXCETEK V500G
Machines for Plastic Injection Molding
INJECTION MOLDING MACHINE BATTENFELD serial nr. 45/200/01/03/5/30
INJECTION MOLDING MACHINE KRAUS MAFFEI 80/220 C1
INJECTION MOLDNIG MACHINE KRAUS MAFFEI 80-135 C
INJECTION MOLDNIG MACHINE KRAUS MAFFEI KM-80-390 C1
This post is also available in: Slovenian